typedef enum {
    MEIMotorResourceNumberINVALID,
    MEIMotorResourceNumber0,
    MEIMotorResourceNumber1,
    MEIMotorResourceNumber2,
    MEIMotorResourceNumber3,
    MEIMotorResourceNumber4,
    MEIMotorResourceNumber5,
    MEIMotorResourceNumber6,
    MEIMotorResourceNumber7,
    MEIMotorResourceNumber8,
    MEIMotorResourceNumber9,
    MEIMotorResourceNumber10,
    MEIMotorResourceNumber11,
    MEIMotorResourceNumber12,
    MEIMotorResourceNumber13,
    MEIMotorResourceNumber14,
    MEIMotorResourceNumber15,
    MEIMotorResourceNumber16,
    MEIMotorResourceNumber17,
    MEIMotorResourceNumber18,
    MEIMotorResourceNumber19,
    MEIMotorResourceNumber20,
    MEIMotorResourceNumber21,
    MEIMotorResourceNumber22,
    MEIMotorResourceNumber23,
    MEIMotorResourceNumber24,
    MEIMotorResourceNumber25,
    MEIMotorResourceNumber26,
    MEIMotorResourceNumber27,
    MEIMotorResourceNumber28,
    MEIMotorResourceNumber29,
    MEIMotorResourceNumber30,
    MEIMotorResourceNumber31,

}MEIMotorResourceNumber;

MotorResourceNumber is an enumeration value used only for XMP-Pulse controllers. All other XMP controllers should have the Step Resource Number set equal to the Motor number. XMP-Pulse users can set the Resource Number to allow sharing of a single motor block's resources between two stepper motors. e.g. Motors 0 and 16 could both be configured to use the output signals from Motor Block 0 by each having their Motor Resource Number set to 0.