Installing
and Running VM3
VM3
is installed with each full XMP software installation, along
with Motion Console, Motion Scope and various system files.
The VM3 executable (vm3.exe) is normally located within the
XMP/bin/Win95 and WinNT paths. The utility is launched from
the DOS command prompt by entering vm3.
When
booting, VM3 first examines data in the xmpNNLN.xmp file
to map memory, where NNN is the firmware version
number. It is necessary that the version of VM3 you are running
matches the firmware version of the
xmpNNN.map file; otherwise, the system will fault or
request an update.