CONTENTS:
Introduction
Connect to Analog Servo Amplifiers
Drive Enable Wiring
Connect To Digital Quadrature Encoders
Connect System I/O
Analog Inputs
Connect XMP Transceiver I/O as a Capture Input
Connect Two XMP Boards (12-16Axes)
Configuring Analog Connections
CHAPTER 3
Configuring An XMP-analog Motion Control System

Connect Two XMP Boards (12-16 Axes)

To create systems with more than eight (8) axes, use two XMP boards, with one board configured as the main, and the other board configured as the expansion.

Typical Connections s
Main/expansion axis assignments: CPCI.

 

Main/expansion axis assignments: PCI.